Sikadur-30 LP (IN), 6.0 kg x 2
Sikadur-30 LP (IN) is a thixotropic, structural two part adhesive, based on a combination of epoxy resins and especially designed for use at higher temperatures between +25°C and +55°C.
Usage
Adhesive for bonding structural reinforcement, particularly in structural strengthening works. Including:
- Sika CarboDur Plates to concrete, brickwork, timber and steel (for details see the Sika CarboDur Product Data Sheet)
- Steel plates to concrete (for details see the relevant Sika Technical information)
Characteristics
Sikadur-30 LP (IN) has the following advantages:
- Long pot life
- High temperature resistance at elevated curing temperatures (see the Sika Carbo Heater Product Data Sheet)
- Easy to mix and apply
- No primer needed
- High creep resistance under permanent load
- Very good adhesion to concrete, masonry, stonework, steel, cast iron, aluminium, timber and Sika CarboDur® Plates
- Suitable for dry and damp concrete surfaces
- Hardening is not affected by high humidity
- High strength adhesive
- Thixotropic: non-sag in vertical and overhead applications
- Hardens without shrinkage
- Different coloured components (for mixing control)
- High initial and ultimate mechanical resistance
- High abrasion and shock resistance
- Impermeable to liquids and water vapour
Color
- Part A: white
- Part B: black
- Parts A+B mixed: light grey
Packaging
6 kg (A+B) pre-batched unit, pallets of 480 kg (80 x 6 kg)